Home > Juniper, SRX210 > How to reset my Juniper SRX210 to factory default?

How to reset my Juniper SRX210 to factory default?

  1. Enter the load factory-default command.
root@host# load factory-default
  1. Use the set system root-authentication plain-text-password command to set a new root password for the device.
root@host# set system root-authentication plain-text-password
  1. Enter the root password, and enter it again for confirmation.
New password:
Retype new password:

Caution: Before you commit changes, if you do not assign an IP address for the ge-0/0/0 interface, create a local user account, and enter routing information, either from CLI configuration or using DHCP, the SRX device is no longer remotely accessible. To manage the SRX device, you must connect a PC or laptop to the physical console, or attach the PC or laptop to a subnet that is directly connected to the ge-0/0/0 interface, which is assigned an IP address of 192.168.2.1.

  1. Use the commit and-quit command to commit the configuration and exit from configuration mode if the configuration contains no errors and the commit succeeds.
root@host# commit and-quit
  1. Use the request system reboot command to reboot the device.
root@host> request system reboot

After the reboot, the factory default configuration is the running configuration.

 

 

Advertisements
Categories: Juniper, SRX210
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: